A detention system can sit beneath a driveway, courtyard or landscaped area for years without drawing attention. Then a blocked outlet, damaged grate or missed maintenance condition creates a compliance issue. So, are OSD systems mandatory? Not for every property. In NSW, they are generally required when a council approval, development consent or approved drainage design makes them a condition of development.
The practical point is simple: if an OSD system forms part of your approved site works, it is not optional to remove, alter or ignore it. It is infrastructure that must continue to operate as designed.
Are OSD systems mandatory under NSW rules?
There is no single rule requiring every home, strata scheme or commercial site to have an OSD system. Whether one is required depends on the property, the scope of works and the conditions attached to the relevant approval.
Councils commonly require on-site detention where development changes the amount or speed of rainfall runoff leaving a site. A new dwelling, extension, hardstand area, driveway, subdivision or redevelopment can increase impervious surfaces. Detention is used to temporarily hold runoff and release it at a controlled rate, helping protect downstream drainage assets and reduce localised flooding risk.
The requirement may appear in several project documents, including the development consent, stamped drainage plans, engineering drawings, a drainage report or conditions issued before an occupation certificate. The approved design will normally nominate the required storage volume, outlet arrangement, overflow path, access points and maintenance expectations.
For an existing property, the question is less about whether a new system should be installed and more about whether an approved system is already present. If it is, the obligation to retain and maintain it usually continues, even if ownership changes.
When an OSD system is likely to be required
A council assesses each application against its planning controls, drainage requirements and site conditions. Requirements differ between local government areas, so assumptions based on a neighbour’s property can be costly.
An OSD system is more likely to be included where a proposal adds roof area, paving or other hard surfaces; replaces a smaller dwelling with a larger one; alters levels or drainage paths; develops a constrained site; or forms part of a larger strata or commercial project. Some sites may instead require another approved drainage solution. The outcome depends on the approved design, not a general rule of thumb.
For homeowners, this matters before building work starts. A detention structure added late in the project can affect driveway levels, landscaping, access covers and available outdoor space. Reviewing the approved drainage documents early avoids expensive rework.
For strata managers and facilities teams, the issue is often historical. The system may be beneath common property, but its purpose and maintenance obligations can be unclear after years of contractor changes. A specialist inspection can identify what is installed, whether it matches available plans and what work is needed to restore reliable operation.
Approval conditions are not one-off requirements
It is a common misunderstanding that OSD obligations end when construction is complete. In most cases, installation is only the first step. The system needs ongoing maintenance because it relies on clear pits, filters, grates, screens, pipes, outlets and overflow routes.
Leaves, sediment, garden mulch and rubbish can reduce storage capacity or obstruct the controlled outlet. Damage from vehicles, landscaping works or unauthorised alterations can also change how the system performs. A detention tank may look sound from above while its internal components are blocked or deteriorated.
Where a system is required by consent, poor maintenance may create several problems at once: surface flooding on site, damage to neighbouring areas, safety hazards around pits or covers, and difficulty demonstrating compliance if council requests information. The cost of planned inspections is generally far lower than rectifying a failed system after heavy rainfall.
Who is responsible for maintaining an OSD system?
Responsibility usually follows ownership and the approved property arrangement. For a house, this is commonly the owner. In a strata scheme, the system may be common property, meaning the owners corporation is responsible for arranging maintenance. For leased commercial premises, the lease and site documentation may allocate responsibilities between owner and tenant, but the property owner should not assume the obligation has disappeared.
The exact position should be checked against the development consent, plans, strata records and any maintenance schedules. If documents are missing, a site inspection and records search can provide a practical starting point.
Maintenance is not simply a matter of clearing visible debris. A proper service should assess access and safety, inspect pits and chambers, remove accumulated sediment, check grates and covers, test the outlet arrangement where appropriate, identify defects and record findings. Formal reporting gives owners and managers evidence of the system’s condition and a clear basis for remedial work.
Can you remove or modify an existing OSD system?
Not without checking the approval pathway first. Removing a tank, filling a chamber, paving over an access point, changing an outlet or redirecting site drainage may breach consent conditions and compromise the approved drainage design.
This issue often arises during renovations. A homeowner may want to extend a patio, resurface a driveway or improve a garden. A strata scheme may need to replace a failed cover or alter common areas. These works can be achievable, but they should be planned around the existing detention requirements rather than treating the system as redundant.
If the system is damaged, undersized, difficult to access or no longer suitable for the site, the right response is an assessment. Depending on the findings, the solution may be repair, cleaning, component replacement, an upgrade or a revised design supported by the necessary approvals. The best option depends on the original consent, current site condition and proposed works.
What to do if you are unsure whether your property has OSD
Start with the documents available for the property. Look for development consent conditions, drainage plans, engineering drawings, occupation records, strata files and past inspection reports. Terms such as detention, on-site detention, storage tank, outlet control, orifice, charged line, overflow and maintenance schedule may indicate that a system exists.
Then inspect the site carefully. Access covers, grated pits, underground chambers, tanks beneath driveways and unusual drainage structures can all be signs of detention infrastructure. Do not enter confined spaces or remove heavy covers without appropriate controls. These assets can present serious safety risks.
If the records are incomplete or the layout is unclear, arrange a specialist inspection. The purpose is to establish what is on site, how it is meant to operate, whether it is accessible and whether maintenance or remedial works are required. For properties in Sydney and the Central Coast, Stormwater Sydney can inspect, clean, report on and rectify drainage and detention assets through one coordinated process.
A practical maintenance approach
There is no useful one-size-fits-all maintenance interval. A small residential system beneath a clean driveway may need a different schedule from a strata property surrounded by mature trees or a busy commercial site. Rainfall exposure, nearby landscaping, site use and the system’s condition all affect service frequency.
As a baseline, owners should inspect accessible grates and pits after significant rainfall and keep access covers clear of landscaping, stored items and parked vehicles. Scheduled professional maintenance should be based on the approved requirements and the asset’s risk profile. Properties with a history of blockages, surface ponding or sediment build-up may need more frequent attention.
Keep inspection reports, cleaning records, photographs and invoices together with approval documents. This provides a useful asset history for future maintenance, property sales, strata decision-making and any council enquiry.
An OSD system is mandatory only when the relevant approval or design requires it, but maintaining an existing approved system is not a matter to leave until there is a visible problem. A clear inspection and maintenance plan protects the site, supports compliance and makes future property decisions far easier.

